Login (web Server): www.TrackingInTime.cloud    or    https://TrackingInTime.cloud 

Server: 197.242.150.95 (IP Address)

Manager App

TS-V6:

  1. Setup the tracker on the system.
  2. Put the Sim in the tracker, connect it, and turn it on. (There is an on off button inside the tracker, the lights will turn on)
  3. SMS it 886# (You will receive all the details back.) if you do not receive details back do not continue. Check the SIM has SMS’s available. Check the SIM is working in another device. Check the SIM is inserted the correct way around. Check the device is powered on. Check the device is able to get GPS signal.
  4. If the sms received back is in Chinese send an sms “LANG0#” (zero (0) not an o)
  5. SMS 803#197.242.150.95#5002#  (points the device to to the GPS Server)
  6. Moving Upload: MUP#Seconds# or 730#Seconds#
  7. Static Upload: SUP#Minutes#
  8. Check to see the GPS is showing on the App / GPS Server (SIM must have available data)
  9. Status Check: 902#
  10. Restart GPS: 930#
  11. Restore GPS to factory settings: 940#  (use this to setup the GPS from the beginning again)

Other Commands:

  1. APN:  APN#network name#username#password# or 802#network name#username#password#  (Generally 802#internet#123#123#  (123 is for no username or password))
  2. Moving Upload: MUP#Seconds# or 730#Seconds#
  3. Static Upload: SUP#Minutes#
  4. Stop Vehicle: Stop# or 222#
  5. Release Vehicle Stop: Run# or 333#
  6. Speed Alarm: SSA#kilometres#
  7. Cancel Speed Alarm: CSA#
  8. Google Link: LOC#
  9. Parameters Check: 886#
  10. Set language to English: LANG0# (number 0)
  11. Status Check: 902#
  12. Restart GPS: 930#
  13. Restore GPS to factory settings: 940#
  14. Latitude and Longitude of GPS: 666#
  15. Location: 988#
  16. Parameters Check: 886#
  17. Status Check: 902#
  18. Google Link: LOC#
  19. Admin: 710#number# (maximum of 2 numbers can be admin, only admins can receive speed alarms and stop sand start vehicle)
  20. Setting up the second admin 711#number#
  21. Admin Check: 901#
  22. Admin Delete: D01# or D02#
  23. Time Zone: STZ#Time Zone#     (STZ#W3#   for South Africa)
  24. Vibration Alarm: 123#Number#alarming way# (“Number is “1-5” and 1 is most sensitive), (“alarming way” is 1 = calling, 2 = SMS, 3 = call and SMS)

Rules: Ensure when setting up the GPS for the first time you have:

  1. Sim card inserted correctly
  2. SMS’s available
  3. Data available
  4. Excellent cell/mobile signal for that sim card service provider
    1. You should receive and instant reply for command every SMS sent to the GPS
  5. Excellent GPS signal
    1. Not inside an office with barely any windows
    2. Not inside an office under concrete floor
    3. Not inside an office in a valley
    4. Not inside a steel warehouse
  6. Ensure you use the correct identifier / IMEA length number for  the correct GPS
  7. Ensure follow the setup steps
  8. Ensure you enable the upload times
    1. Very short for initial setup and testing i.e. every 1 minute
    2. MUP (Mobile Upload Time), SUP (Standing Upload Time), CheckGSM, CheckM

Adding a Device – “Device Identifier”

  • On the “Tracking in Time” app or cloud system.
  • When adding a device use the last 11 digits of the IMEA number and add a 0 (zero to the left)  – T6 wired unit.
  • 5in1 Unit uses the full IMEA number.
  • OBD plug in units of use the last 10 digits of the IMEA number.
  • Generally the serial number on a GPS will be one of the above numbers you should use.